Full Automatic Wine Capsule Machine , Rubber Capsule Making Machine 120 Capsules Per / Min

Full automatic 120 capsules per minute Wine capsule

machine,Rubber Cap Forming machine

1. Application:

The capsule making machine is automatic machine to make PVC wine capsule.

2. Function:

Automatic plastic cap forming machine The main system profile >> skirt bronzing system: the machine is equipped with automatic bronzing system can be continuously in the PVC heat shrinkable film and aluminum-plastic composite materials for hot stamping exquisite designs and text, Material using synchronous motor control.
>> Drawing system: The machine is equipped with drawing automatic paste device, wire drawing material using stepper motor control, the width of 1mm-10mm adjustable.
>> Top Hot Stamping System: This machine is equipped with automatic hot stamping system for top cover. Stepper motor control is adopted for hot stamping. The top cover can be embossed with concave pattern with the same pattern as hot stamping, Protruding outside.
>> Pneumatic gasket at the top Punch system: This machine is equipped with a gasket system installed on the top. The gasket adopts the stepper motor control to take the material and the pneumatic die can accurately send the gasket to the center position.

2. Technical Parameters:

2-1 Output (depends on design of wine capsule and quality of material)

2-1-1 Design production capacity of the machine 130 PCS/min

2-1-2 Normal capacity of the machine 120PCS/min

2-1-3 Capacity of the machine with skirt stringing system 110PCS/min

2-1-4 Capacity of the machine with skirt gilding system 120PCS/min

2-1-5 Capacity of the machine with top disc gilding system 120PCS/min

2-2 Specification of shrinkable Wine Capsule

2-2-1 Top diameter 27mm~

2-2-2 Bottom diameter Maximum 35mm

2-2-3 Height 45mm ~70mm

2-2-4 Taper about 1.5°~3°

Note: Different sizes of caps need different moulds.

Basic configuration: 12moulds/set, we provide one set with the machine,

If you want more sets, extra cost will be required.

2-3 Main Materials (PVC Thermal Shrinkable Film/Aluminum polylaminate )

2-3-1 Diameter of roll center 3" (76mm)

2-3-2 Outer diameter of material roll Maximum 480mm

2-3-3 Width of material roll Maximum 120mm

2-3-4 Thickness of PVC material roll 0.065 mm ~0.08mm

2-3-5 Thickness of Aluminum polylaminate 0.065 mm ~0.12mm

2-4 Top Cap Material (Aluminum Foil / PVC )

2-4-1 Diameter of roll center 3" (76mm)

2-4-2 Outer diameter of material roll (Maximum) 280mm

2-4-3 Width of material roll (Maximum) 40mm

2-4-4 Thickness of material roll PVC 0.06mm~0.08mm

2-4-5 Thickness of material roll Aluminum 0.08mm~0.12mm

2-5 Size of Machine: about 6000mmx3000mmx1700mm

2-6 Weight of Machine: about 4.5T

Weight of customized model is subject to final finished machine.

Specification:

Details: