Higee Machinery (Shanghai) Co.,Ltd
Higee Machinery (Shanghai) Co.,Ltd Filling, Capping and Labeling Machine Manufacturer and One Stop Expert Provider
Add to Cart
Automatic weighing filling machine for Oil ,Water, solvents, alcohol, specialty chemicals, paint, inks, corrosive chemicals
Application :
HG-500 automatic drum filling sealing machine is suitable for 200L standard drum below-bunghole filling for normal viscosity liquid product. The fully automatic filling line can automatically perform empty drum infeed, positioning, bunghole positioning, unsealing and de-bunging, dosing filling, capping and sealing, filled drum outfeed and palletizing with auto filling circulation and error proofing interlock. And in the meanwhile, all the operation process can be done manually, which contributes to easy commissioning and dealing with special situation when onsite.The HG-500 filing line employs gravimetric type dosing net filling, conducing to high accuracy and easy container/weight conversion.
Feature :
The product contacting pipe and filling valve are made of S304. The filling nozzle uses internal-type metal-sealed bottom valve and compression-type Teflon packing shaft seal, which ensures zero dripping and long endurance. Filling is controlled by two-stage product infeed valve, with fast and slow filling combination valve in the front and manual slow filling adjustment valve, which ensures high filling accuracy.
In addition, the filling machine has a safety interlock system. When the drum is not in the right position or the filling nozzle does not go through the bunghole, the filling valve would not open or start filling; when the filling telescopic pipe touches the drum surface, it would retract automatically.
Transcell stainless steel nitrogen purging sensors are embedded with the weighing platform on the filling stations. UNIPLUS instruments are installed with the control cabinets. The weighing platforms keep low with only 10cm high, which also endure high temperature.
There are 4 parts of roller conveyors used in the system: empty drum infeed, weighing, filled drum outfeed, and filled drum wait-shovel. Apart from the filled drum wait-shovel roller conveyor, all the other roller conveyors used are power roller conveyors equipped with ex-proof motor and reduction gears. All the rollers are kept within 10cm high, improving easy and safe operation.
Technical parameters:
| Name | Drum filling machine |
| Model | HG-500 |
| filling precision | ±0.1%F.S. |
| Filling speed | as request |
| Voltage | 380 V 50 hz 3 phase |
| air supply | 0.6Mpa |
| Operating temperature | -10℃-50℃; |
| Relative humidity | < 95% (no condensation); |
| control method | Two-section liquid infeed weight control (with backflow control) |
| Filling method | Submersible type |
| Weighing platform size | 3000 * 1700 mm*2100 mm |
| Spray gun head tube | Teflon; |
| Tube pressure | 0.2-0.6MPa |
| Material interface | DN50-flange joint; |
| Air source interface | The user provides G1/2 internal thread for quick connector connection; |
Drum filling machine picture and sample :
